Datasheet4U Logo Datasheet4U.com

DS2413 - 1-Wire Dual Channel Addressable Switch

Description

The DS2413 is a dual-channel programmable I/O 1-Wire® chip.

The PIO outputs are configured as open-drain and provide up to 20mA continuous sink capability and off-state operating voltage up to 28V.

Control and sensing of the PIO pins is performed with a dedicated device-level command protocol.

Features

  • Controls Dual Programmable High Voltage, High Current I/O Port Pins from a Single Micro Port Pin o Open-Drain Programmable I/O Pins Support 20mA max Continuous Current Sink o 28V (max) PIO Pin Operating Voltage o On-Resistance of PIO Pulldown Transistor 20Ω max; OFF Resistance 1MΩ min o Parasitic Power Supply Through 1-Wire.
  • Minimalist 1-Wire Interface Lowers Cost and Interface Complexity o Communicates to Host with a Single Digital Signal at 14.9kb or 100kbps o Switchpoint Hy.

📥 Download Datasheet

Datasheet preview – DS2413

📁 Similar Datasheet

  • DS2415 - 1-Wire Time Chip (Dallas Semiconducotr)
  • DS2401 - Silicon Serial Number (Analog Devices)
  • DS2404 - EconoRAM Time Chip (Dallas Semiconducotr)
  • DS2404S-C01 - Dual Port Memory Plus Time (Dallas Semiconducotr)
  • DS2407 - Dual Addressable Switch Plus 1K.Bit Memory (Dallas Semiconducotr)
  • DS2409 - MicroLAN Coupler (Dallas Semiconducotr)
  • DS2430 - 256-Bit 1-Wire EEPROM (Dallas Semiconducotr)
  • DS2431-A1 - 1-Wire EEPROM (Analog Devices)
  • DS2433-Z01 - 4K-Bit 1-Wire EEPROM (Dallas Semiconducotr)
  • DS2434 - Battery Identification Chip (Dallas Semiconducotr)
Other Datasheets by Maxim Integrated
  • DS2411 - Silicon Serial Number
  • DS2417 - 1-Wire Time Chip
  • DS2401 - Silicon Serial Number
  • DS2405 - Addressable Switch
  • DS2406 - Dual Addressable Switch Plus 1Kb Memory
  • DS2408 - 1-Wire 8-Channel Addressable Switch
  • DS2422 - 1-Wire Temperature/Datalogger
  • DS2423 - 4kbit 1-Wire RAM

Full PDF Text Transcription

Click to expand full text
19-5316; 3/15 DS2413 1-Wire Dual Channel Addressable Switch GENERAL DESCRIPTION The DS2413 is a dual-channel programmable I/O 1-Wire® chip. The PIO outputs are configured as open-drain and provide up to 20mA continuous sink capability and off-state operating voltage up to 28V. Control and sensing of the PIO pins is performed with a dedicated device-level command protocol. To provide a high level of fault tolerance in the end application, the 1-Wire IO and PIO pins are all capable of withstanding continuous application of voltages up to 28V max. Communication and operation of the DS2413 is performed with the single contact Maxim/Dallas 1-Wire serial interface.
Published: |